Before installing King Panel PVC Products we suggest to read all installation tips and info thoroughly on our products.
It will make your installation much easier.

Preparation of the Wall

In case of uneven or damaged walls, a wooden framework is fixed to the wall in order to provide an even surface onto which the PVC panels are fitted. Battens are placed with screws into wall plugs and are facing the opposite direction of the PVC panels (if the panels are placed horizontally, then the battens are placed vertically, and vice versa). The wooden battens are placed maximum 40cm (16 inch) apart.

In case of a flat and even wall, a simple adhesive can be used without the framework. The PVC panels can be glued straight onto existing tiles, without removing these tiles. Painted surfaces should be suitably prepared before applying any adhesive.

No special conditioning of any King Panel PVC building product is required; merely allow King Panel waterproof panels to acclimatize to room conditions.

Get your Installation Instructions

Installation Instructions PDF (Right Click -> Save Target As... - To Download PDF)